Če v prihodnosti ne želite prejemati naše tehnične informacije, prosimo ODJAVITE SE S SEZNAMA
TUKAJ (z naslova na kateri ste prejeli to obvestilo).

 
 
 
marec 2020.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Industrial serial to Ethernet converter 
 
 
 
 
 
 
 

Technical characteristics:
  • serial ports: 0 or 1 x RS-422/485, 4-pin screw terminal,
    1 or 2 x RS-232, 9-pin D-sub, 115.2 kbit/s,
  • Ethernet port: 1 x RJ-45, 10/100 Mbit/s,
  • power supply: dual 10 - 60 VDC,
  • MTBF (Mean time between failures) MIL-HDBK-217K:
    114 years (1.000.000 h),
  • operating temperature: -25 to +70 °C,
  • total galvanic isolation & transient protection,
  • UDP, TCP client and TCP server with packing algorithm,
  • Modbus TCP to RTU/ASCII gateway (EDW-100),
  • DIN rail mounting,
  • warranty 5 years.

EDW-100 and EDW-120 serial adapters are designed to allow communication of devices with serial RS-232/422/485 ports over the TCP/IP Ethernet network. DIP switches are used to configure serial ports and Ethernet ports, and a password-protected web interface for all other settings. Diagnostic information can be accessed via Telnet session, while more basic information is offered on LEDs. The devices are designed for use in heavy industrial applications. 

 
 
 
EDW-100/120 point-to-point communication:

EDW-100/120 one-to-many communication:

EDW-100/120 as remote serial interface:
 
 
 
 


Za več informacij obiščite Westermo spletno stran, ali pa se obrnite na pooblaščenega Westermo distributerja, podjetje Microstar d.o.o. (e-mail). 

 
MICROSTAR d.o.o., Siget 18B, HR-10020 Zagreb, tel./fax: +385 1 3647 849
www.microstar.si westermo@microstar.si